JCM Part No . 960 - 000044R _ Rev . 2 © 2007, JCM American, Corporation 7 Machine Number Set Ticket Procedure Intelligent Cash Box (ICB) System Software The only change necessary on this window could possibly be the COM Port setting in the Port pull - down menu . 6 . If no change is required, click on the “ SET ” Screen Button . This action opens the primary “ Ticket Format ” window shown in Figure 22 . 7 . The following four (4) Forms are displayed by the “ Ticket Format ” window: –   Form - 1 : Is used for individual Machine Tickets . The top portion of the form is where the customer can enter specific information, such as Name, Address and Telephone Number . The Machine Code section is where each machine can be assigned a unique 14 - digit identification number . The number can reflect the location, asset number, et - cetera (Review Figure 22) . –   Form - 2 : Is used to manually establish a sequential series of Machine Number Tickets . However, the customer identification information must be entered as on Form - 1 ( See Figure 23) . –   With the power OFF, open the printer and turn DIP Switch #1 to ON ( See Figure 24) . This is for printing sequential tickets using the “ Ticket Format ” sub - window in Form - 2 and Form - 3 . –   Form - 3 : Once an Excel (or other) database file has been converted to the . csv format, use the “ CSV file load ” button to download the file ( See Figure 25) . –   Form - 4 : This form is not being used at this time . NOTE: The “Attr Bar Code” window must always show an 01 (See Figure 22 a) . Figure 22 Ticket Format Window (Form 1) a NOTE: Leave the number shown in the “ Number of Tickets ” window at 1 unless multiple tickets for the same machine are required . Figure 23 Ticket Format Window (Form 2) Figure 24 Sequential Printing Switch Setting NOTE: Use the sample file, template . xls, to format the database properly . Figure 25 Ticket Format Window (Form 3)