JCM Part No . 960 - 000053R _ Rev . 6 © 2007, JCM American, Corporation 1 - 9 General Information AD - 02™ Retrievable Bill Validator Section 1 Insertion Specifications Dispenser Specifications Indicator Specifications Table 1 - 4: AD - 02 Bill Acceptor Insertion Specifications N o FUNCTION SPECIFICATION 1 Denominations Accepted: $1, $5, $10, $20, $50, $100 US mixed acceptance 2 Insertion Method: Bulk Insertion - 4 way acceptance 3 Maximum Number of Bills per Insertion: 20 bills 4 Speed: Approximately 1 . 2 bills per second 5 Validation Method: Optical and Magnetic 6 Insertion Cancellation: Inserted bill returned (general rule) 7 Reject Method: Bulk Return 8 Storage Method: $1, $5 & $10 individual bins, $20, $50 & $100 mixed bins 9 Number of bills stored: $1, $5 & $10 bills maximum, $20, $50 & $100 bills maximum 10 Storage Full Detection Method: Optical Table 1 - 5: AD - 02 Bill Acceptor Dispenser Specifications N o FUNCTION SPECIFICATION 1 Denominations Accepted: $1, $5 & $10 2 Dispense Method: Bulk dispensing 3 Speed: Approximately 2 bills per second 4 Maximum Number of Bills Dispensed: 20 bills 5 Reject Method: Bulk Reject 6 Dual Bill Detection: Optical 7 Bin Content Low Detection: Optical, approximately 20 bills 8 Reject Bin Full Detection: Optical & Software (40 bills maximum) Table 1 - 6: AD - 02 Bill Acceptor Indicator Specifications N o FUNCTION SPECIFICATION 1 Insertion Lamp: 2 Dispenser Lamp: Bulk dispensing 3 Indicator Area: Three (3) top LED indicators (i . e . , bill jam, bill full and bill shortage indicator) 4 DIP Switches & Indicators: Three (3) on the left side of the cabinet (i . e . , SW1 = Clear Operation, SW2 & SW3 = Test mode) Four (4) Digit, Seven (7) Segment LED Display Condition Indicator