JCM Part No . 960 - 000053R _ Rev . 6 © 2007, JCM - American Corporation 4 - 1 0 Section 4 AD - 02™ Retrievable Bill Validator Disassembly/Reassembly Course Guide B Removal 5 . Remove the two (2) Course Guide mounting screws ( See Figure 4 - 34 a) . 6 . Open the Course Frame and push slightly in on the Catch Tabs to release Course Guide (B) from the frame ( See Figure 4 - 34 b) . 7 . Remove the Drive Shaft locking E - ring and pull the Drive Shaft out away from the Bear - ing (See Figure 4 - 35 a 1 & a 2 ) . 8 . Remove the two (2) #40S2M260 Timing Belts ( See Figure 4 - 35 b 1 & b 2 ) . a) c) d) b 2 ) b 3 ) b 1 ) Figure 4 - 32 Validator Drive Motor Cover Removal a 1 ) a 2 ) b 1 ) b 2 ) Figure 4 - 33 Validator Drive Motor Removal b) a) Figure 4 - 34 Course Guide Removal b 1 ) b 2 ) a 2 ) a 1 ) Figure 4 - 35 Timing Belt Removal