JCM Part No . 960 - 000053R _ Rev . 6 © 2007, JCM - American Corporation 6 - 1 AD - 02 ™ Retrievable Bill Validator Bill Acceptor Series S e c t i o n 6 6   PROGRAMMING AND TESTING This section provides Flash Memory Download Programming, Calibration, and Performance Test - ing instructions for the JCM AD - 02™ Retrievable Bill Validator . This section contains the following information: •   Tool Requirements •   Software Download Preparation •   Control Panel Overview •   Major Component Locations •   Test Mode Initialization •   Error Log Downloading Procedure •   Error Log Clearing Procedure . Tool Requirements The following tools are required to perform a field or workbench software download ( See Figure 6 - 2): •   JCM AD - 02™ Retrievable Bill Validator •   User Supplied 24VDC 3Amp External Power Supply (Fused for a 10 Amp surge) or equivalent •   PC containing an unused Comm Port (OS: Windows 2000/XP) . •   DB9 Cable (Male to Male) (See Figure 6 - 1) . •   The latest AD - 02™ Download Tool Application (AD - Bt _ DwLd . exe) . Software Download Preparation The following instructions describe how to decompress and store a downloaded program onto a personal computer (PC) for eventual installation into the AD - 02™ Retrievable Bill Validator: 1 . Refer to the Figure 6 - 2 interconnection diagram to properly connect the power cable and communication harness to the AD - 02 . 2 . Figure 6 - 3 illustrates the AD - 02’s DIP Switch, LED Indicators, Pushbuttons and External Port locations . Figure 6 - 1 Download USB Cable Requirement Figure 6 - 2 AD - 02 Required Download Tools