JCM Part No . 960 - 000058R _ Rev . 2 © 2008,   JCM - American Corporation 2 Section 1 EBA - 03 Bill Validator General Information Specifications Table 1 - 1 lists the EBA - 03 General Specifications . Primary Component Parts Figure 1 - 2 illustrate the Primary Component Part names for the EBA - 03 . Table 1 - 1   General Specifications Condition Function Acceptable denominations: DIP Switch selectable Insertion direction: Four - way Acceptance rate: 90+% in normal acceptance mode . (Exclusions would include bills containing contamination, having excessive wear, wet, or torn, and those with their corners or ends folded, dimensions altered or print significantly different than reference note ). Validation time: Approximately two (2) seconds (Time from insertion to output of credit pulse or storage verification) Power: DC +12V (± 5%) Power consumption: In standby: 2 . 5 VA In Operation: 6 . 0 VA (Max . 10 VA) Operating environment: Operating temperature: 5°C - 50°C (41°F - 122°F) Storage temperature: - 20°C - 60°C (4°F - 140°F) Humidity: 30% - 85% RH (non - condensing) Light sensitivity: Must not be exposed to direct sunlight Installation: Indoors only Dimensions: See dimension drawings on Page 4 for further detail Weight: approximately 0 . 6 Kg (1 . 32 lb . ) Installation: Horizontal Figure 1 - 2 EBA - 03 Primary Component Parts