JCM Part No . 960 - 000058R _ Rev . 2 © 2008,   JCM - American Corporation 3 General Information EBA - 03 Bill Validator Section1 Precautions The Figure 1 - 3 symbols are defined as follows: 1 . ( Ty pe 1 ) Do not insert a torn, folded, or wet bill, as this action may cause a bill jam inside the unit . 2 . ( T ype 2 ) Do not expose the unit to water . The unit contains several precision elec - tronic devices which can be damaged if water or any liquid is sprayed or spilled into the unit . 3 . ( T ype 3 ) Do not install the unit into a dusty environment . Dust may affect the sensor’s performance . Dimensions Figure 1 - 4 illustrates the typical EBA - 03 external dimensions in millimeters .         Type 1 Type 2   Type 3 Figure 1 - 3 Precautionary Symbols Figure 1 - 4 EBA - 03 Bill Validator Dimensions All Dimensions are in Millimeters