JCM Part No . 960 - 000076R _ Rev . 1 © 2007, JCM - American Corporation 1 - 5 General Information World Bill Acceptor (WBA® - 1x/2x - SS & SS2) Section 1 System Configuration Primary Features The WBA Series of Bill Validators contains the following primary features: •   Interchangeable Bill Guides –   Ability to read a wide range of bill sizes . Four types of bill guides are available for the WBA . Switching the bill guides allows the unit to read bills ranging from 62mm to 82mm wide . –   The length of bills read are from 125mm t 170mm (See Figure 1 - 5) . •   DIP Switch Programmable Bill Acceptance –   DIP switch settings to accept/reject bills –   Up to 7 denominations acceptable . –   Accept or Reject of each denomination is DIP Switch selectable . •   Easy Bill Retrieval –   The cash box can be detached from the main unit to withdraw deposited bills . –   The machine can be equipped with a lock for higher security . Each SS and SS2 cash box stores up to 500 bills (See Figure 1 - 6) . Figure 1 - 4 illustrates a typical WBA system configuration . Figure 1 - 4 WBA System Configuration Figure 1 - 5 WBA Bill Guide Interchangeability Figure 1 - 6 WBA Easy Bill Retrieval Feature