JCM Part No . 960 - 000102R _ Rev . 2 © 2006, JCM - American Corporation 1 - 2 Section 1 Optipay™CC General Information At the beginning of each section you will find a "Section Guide", that summarizes the content of the specific section . Separate software instructions to configure the Coin Changer are located in "Configuration" Sec - tion 11 . •   WinEMP © – Runs on the Microsoft Windows © Operating System and includes test, configuration, and channel set programming functions for the A - 66 Coin Changer . •   PalmA66 © – Includes configuration, service, and diagnostic functions for the A - 66 Coin Changer . •   PalmEMP © – Includes test, configuration and channel set programming functions for the A - 66 Coin Changer in a Palm application format . Coin Changer General Information The integrated Coin Validator contains the same reliable and secure recognition technology as the G40 - 4000 model used in the G - 46 Global Changer . New or fraudulent coin issues can be resolved quickly at the service center using the WinEMP © application or at the machine by means of the PalmEMP © application . This manual covers the configuration procedure using the Palm Pilot ® . For configuration using the WinEMP © or PalmEMP © applications, refer to Section 11 . Token types not programmed by the manufacturer, can be programmed directly at the Coin Changer by using the Palm A - 66 software . Refer to Section 12 . Advantages •   Easy configuration allows for fast reaction to changing market situations and new false coin introductions •   Configuration tools: –   WinEMP © PC software for the workshop –   PalmA66 © or PalmEMP © with Palm Pilot ® handheld software for field use •   Reliable sensing system and optimum rejection of false coins due to the integrated, electronic A - 66 Coin Validator •   Universal payout mechanism for different coin diameters and thicknesses •   Flexible payout combinations •   Splash - proof electronics •   Acceptance speed of 2 coins per second •   Teach mode, able to learn up to three different tokens types or sizes •   Flash Memory technology for time - saving software updates •   Sophisticated anti - tampering system •   Troubleshooting LED's for quick diagnostics . Service Tools In order to test the Coin Changer and adapt it to the individual needs of your facility, the following accessories can be acquired from JCM: PC Test Station If you only wish to check the functionality of the Coin Changer without making any adjustments, the JCM Test Station is sufficient for this purpose . The Test Station is composed of the following two components: •   Test software WinSPT © •   Tester G - 19 . 0654 for Vending Machine simulation and MDB functional testing . Configuration Tools In order to react as quickly as possible to new false coins in the workshop or on site, and enable indi - vidual adjustments, the coin changer can be con - nected to a: •   JCM Programming Station consisting of: –   WinEMP © configuration and diagnostics software –   Tester G - 19 . 0641 •   JCM Palm Pilot ® , and applications PalmEMP © and PalmA66 © for a Palm Pilot ® handheld Section 11 "Configuration" describes the configu - ration tools required to change the Coin Changer’s operating parameters . Update Tools The Coin Changer’s integrated Coin Validator is equipped with microprocessor circuitry that con - tains Flash Memory . This allows quick updates of the Coin Validator’s operating software without complications . In order to load new operating NOTE: If these instructions are not avail - able to you, they can be downloaded at any time from the JCM home page (www . jcm - american . com) in a compressed Portable Document File (PDF) format .